Search
Categories
Browse Products
Kelly Resources
Home > Warewashing > Sinks, Dishtables
Sinks, Dishtables
Sort By:
Page of 2
18-53C 18-43L 18-43R
Standard 1800 Series, Underbar Sink Unit, three compartment, 60"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on left, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF
HS-1515 1B16204-1D18R 18-1C
Drop-In Hand Sink, one compartment, 15"W x 15"D x 5-1/8"H O.A., 12" wide x 10" front-to-back x 5-1/8" deep compartment, 4" O.C. deck mount faucet gooseneck with gooseneck spout (low lead compliant), 1-1/2" drain, stainless steel construction, NSF (14-3/8"W x 14-3/8"D cut-out required) Sink, (1) 16"W x 20" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Standard 1800 Series, Underbar Hand Sink Unit, freestanding, 12"W x 18-1/2"D O.A., 3-1/2"H backsplash, 10" wide x 14" front-to-back x 7" deep bowl, 4" O.C. splash mount faucet with swing spout (low lead compliant), 1-1/2" rear corner drain with overflow pipe, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF
HS-9L HS-30L HS-2L
Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 8"H backsplash, 9-3/4" wide x 11-3/4" front-to-back x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 9-3/4" wide x 11-3/4" front-to-back x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), 7"H backsplash & side splashes on left & right, includes mounting bracket, stainless steel construction Hand Sink, wall mount, 15-3/4"W x 15-1/4"D x 13-3/8"H O.A., 7-3/4"H backsplash, 12-1/2" wide x 9-3/4" front-to-back x 5-5/8" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF
E3S8-18-12-X E3S8-18-12R18-X E3S8-18-12T18-X
E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA (FLYER NET PRICING)
E1S8-18-12-X E3S8-1620-12-X 2B18244-2D18-X
E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation (FLYER NET PRICING) E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) "B" Series Sink, 2-compartment, 75"W x 29-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 24" front-to-back x 14" deep bowls, (2) 18" drainboards, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA (FLYER NET PRICING)
PB-DTA-1620 JDTS-20-48R-X JDTS-20-60R-X
Dish Table Pre-Rinse Basket, with welded slide bar, fits 16" x 20" pre-rinse sink Straight-Dirty Dishtable, 30" W x 48" L, straight design right-to-left, 10" boxed backsplash with 45° top & 2" return, 20"W x 20"D x 8"deep pre-rinse sink with faucet holes, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING) Straight-Dirty Dishtable, 30" W x 60" L, straight design right-to-left, 10" boxed backsplash with 45° top & 2" return, 20"W x 20"D x 8"deep pre-rinse sink with faucet holes, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING)
E3S8-15-14-X PB-DTA-20-01-X CDT6-I6072SBK-L
E-Series Compartment Sink, (3) 15" x 15" x 14" deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) Dish Table Pre-Rinse Basket, with welded slide bar, fits 20" x 20" pre-rinse sink (FLYER NET PRICING) Island - Clean Dish Table, 72" x 60", L-shape, for right to left operation, 16 ga type 300 series stainless steel top, 10"H back splash, 2-1/4"H rolled edge, stainless steel legs & adjustable bracing, stainless steel bullet feet, NSF
JDTC-20-60L-X 3BCS-184-2D18-X BHS1842-TS-X
Dishtable, clean, straight design, 60" L, right-to-left operation, 10" boxed backsplash with 45° top & 2" return, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING) Corner Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (2) 18" drainboards, 10" boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, coved corners at 3/4" radius, bottom of bowls drain to 3-1/2" die stamped opening, (2) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with adjustable bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF, CSA (FLYER NET PRICING) Dishrack Sorting Shelf, 42"W x 18"D x 11"H, wall mounted, slanted, tubular, include: brackets, 16 ga./300 series stainless steel, NSF (FLYER NET PRICING)
BHS1822-TS-X PB-DISINK101405-X E1S8-18-12R18-X
Dishrack Sorting Shelf, 22"W x 18"D x 11"H, wall mount, slanted, tubular, include: brackets, 16 ga./300 series stainless steel, NSF (FLYER NET PRICING) Drop-In Sink, one compartment, 10"W x 14" front to back x 5" deep bowl, 4" OC deck mount faucet holes, 3-1/2" drain, 16/300 stainless steel, (faucet not included), NSF, CSA (FLYER NET PRICING) E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners at coved 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation (FLYER NET PRICING)
E3S8-24-14L24-X 3B184-X 3B18244-1D18L-X
E-Series Compartment Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) Sink, 3-compartment, 59"W x 23-1/2"D x 43"H overall size, (3) 18"W x 18" front-to-back x 14" deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF (FLYER NET PRICING) Sink, 3-compartment, 76"W x 29-1/2"D x 43"H overall size, (3) 18"W x 24" front-to-back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF (FLYER NET PRICING)