Home > Warewashing
Choose a sub category:
Janitorial, Cleaning, Maintenance Parts Dish Racks, Dollies
Disposals, Disposers, Waste Drains Faucets, Assemblies Flatware Washing, Storage
Glass Washers, Racks etc. Misc Warewashing Pre Rinse, Spray Units
Sinks, Dishtables Warewashers, General Water, Booster Heaters
Glass Washers, Glass Racks etc.
Warewashing, Sinks
Sort By:
Page of 2
18-53C 18-43L 18-43R
Standard 1800 Series, Underbar Sink Unit, three compartment, 60"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on left, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF
1524G 75 300
Cutlery Bin, 21" x 12" x 4", 4 compartment, stackable, gray, made in USA, high density polyethylene, FDA approved (must order in multiples of 12 each) Disposer, basic unit only, 3/4 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE Disposer, basic unit only, 3 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE
RL-30 S-36 21-139L
Dishwasher, undercounter, 23"W x 25"D x 31-7/8"H, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, ENERGY STAR® Imperial Booster Heater, Electric, 16-gallon storage capacity, 36-KW, stainless steel front, Castone tank, NSF, cUL, UL Krowne Add-On-Faucet, for pre-rinse, with 12" spout, 3/8" NPT male inlet, 3/8" NPT female outlet, low lead compliant (interchangeable with T&S Brass, Encore)
HS-1515 C-12 102-1125
Drop-In Hand Sink, one compartment, 15"W x 15"D x 5-1/8"H O.A., 12" wide x 10" front-to-back x 5-1/8" deep compartment, 4" O.C. deck mount faucet gooseneck with gooseneck spout (low lead compliant), 1-1/2" drain, stainless steel construction, NSF (14-3/8"W x 14-3/8"D cut-out required) Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 12-KW, stainless steel front, Castone tank, NSF, cUL, UL Pre-Rinse Basket, 20" L x 20" W x 2-1/4" D, stainless steel
18-1C HS-9L HS-2L
Standard 1800 Series, Underbar Hand Sink Unit, freestanding, 12"W x 18-1/2"D O.A., 3-1/2"H backsplash, 10" wide x 14" front-to-back x 7" deep bowl, 4" O.C. splash mount faucet with swing spout (low lead compliant), 1-1/2" rear corner drain with overflow pipe, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 8"H backsplash, 9-3/4" wide x 11-3/4" front-to-back x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF Hand Sink, wall mount, 15-3/4"W x 15-1/4"D x 13-3/8"H O.A., 7-3/4"H backsplash, 12-1/2" wide x 9-3/4" front-to-back x 5-5/8" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF
E3S8-18-12-X E3S8-18-12R18-X E3S8-18-12T18-X
E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA (FLYER NET PRICING)
E1S8-18-12-X E3S8-1620-12-X 2B18244-2D18-X
E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation (FLYER NET PRICING) E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) "B" Series Sink, 2-compartment, 75"W x 29-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 24" front-to-back x 14" deep bowls, (2) 18" drainboards, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA (FLYER NET PRICING)
PB-DTA-1620 JDTS-20-48R-X JDTS-20-60R-X
Dish Table Pre-Rinse Basket, with welded slide bar, fits 16" x 20" pre-rinse sink Straight-Dirty Dishtable, 30" W x 48" L, straight design right-to-left, 10" boxed backsplash with 45° top & 2" return, 20"W x 20"D x 8"deep pre-rinse sink with faucet holes, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING) Straight-Dirty Dishtable, 30" W x 60" L, straight design right-to-left, 10" boxed backsplash with 45° top & 2" return, 20"W x 20"D x 8"deep pre-rinse sink with faucet holes, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING)
PB-LWR-1-X E3S8-15-14-X PB-DTA-20-01-X
Twist Handle Lever Waste, for 3-1/2" industry standard sink opening, standard valve, basket strainer (includes an adapter for either 2" or 1-1/2" drain outlet) (FLYER NET PRICING) E-Series Compartment Sink, (3) 15" x 15" x 14" deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF (FLYER NET PRICING) Dish Table Pre-Rinse Basket, with welded slide bar, fits 20" x 20" pre-rinse sink (FLYER NET PRICING)
CDT6-I6072SBK-L JDTC-20-48L-X JDTC-20-48R-X
Island - Clean Dish Table, 72" x 60", L-shape, for right to left operation, 16 ga type 300 series stainless steel top, 10"H back splash, 2-1/4"H rolled edge, stainless steel legs & adjustable bracing, stainless steel bullet feet, NSF Dishtable, clean, straight design, 48" L, right-to-left operation, 10" boxed backsplash with 45° top & 2" return, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING) Dishtable, clean, straight design, 48" L, left-to-right operation, 10" boxed backsplash with 45° top & 2" return, 16/300 stainless steel, rolled front & side rims, 1-5/8" OD stainless steel legs, stainless steel cross rails, adjustable stainless steel feet, NSF (FLYER NET PRICING)